Packaging Type
20 kg.
Description
Acrylic copolymer emulsion based, silicone added, water based, white primer.
Color
White
Places of Use
It can be safely used as a primer on all kinds of plaster, concrete, eternit etc. surfaces.
Properties
It is resistant to external factors, has high covering power and reduces topcoat paint consumption. Since it contains silicone, it allows the surface to breathe and provides water impermeability. Acts as a bridge between topcoat and surface
Technical Specifications
Binder Type: Acrylic copolymer - Silicone resin
Viscosity (KU)(25 °C): 126 ± 3
Density (g/ml) (20 °C): 1.52 ± 0.03
Solids (wt) (%): 71±2
pH: 8.00-9.00
Coating Capacity (Theoretical): 16 m²/lt, 9 m²/kg (30µ dry film thickness)
Coating Capacity (Practical): 0,070-0,080 lt/m² (single coat), 0,1200,140 kg/m²
Drying Time (20 °C): Drying: 4 - 6 hours, Complete Drying: 8 - 10 hours
Thinning Ratio: 15-20% (with water)
Application 1
Application surfaces must be sound, dry and clean. Dirty, dusty, blistered and old painted surfaces should be scraped clean.
Application 2
Polipaint Silicone Interior / Exterior Primer is thinned with 15 - 20% water and applied to the surface with a brush or roller in one coat.
Storage Conditions
It can be stored in its original packaging in 5-35 °C environments away from direct sunlight. Protected from extreme temperature, humidity and frost
Important Warnings
The primer must be thoroughly mixed before use. Ambient temperature should be between 5-35 °C during application. After each application; brush or roller should be cleaned with water. Surfaces on which Polipaint Silicone Interior / Exterior Primer is applied should be protected from physical and chemical factors for 24 hours. The primer should never be discharged into sewage and water channels. Application should be done as stated above.
Prev Page
